The Best Garage Door Company in Minneapolis

Garage door opener repair

Garage door opener repair

Garage door spring replacement

Customer had scheduled an appointment with us because the battery back up and her opener was no longer charging and was not working. The customer also did need a new remote because the other remote was either lost or stolen. I typed up an estimate for the customer, the customer authorized the new remote as well as the new battery backup, I ended up clearing all wireless devices off of the opener itself and then re-synced up the selected wireless devices on hand. Once the remotes and battery back up, we’re all operational with the opener. It was tested several times and everything was operating smoothly and properly.

Garage door repair

Customer called because his wife lost a remote, when I got on site I was able to see the customer had his own supplied remote. He ordered from Amazon. Went to try and sync that up with the opener, but it was not coming out of programming mode, I did have to use an all American door supplied universal remote, which did work instantly, I did have to update the estimate for the customer which he did authorize the new remote supplied by us. Customer was happy everything was operational when working when I left.

Customer called to schedule an appointment because his opener was malfunctioning, and he was getting sick and tired of having to replace parts on it. Once I got out on site and was able to determine that his opener was extremely underpowered for the size and weight of his door. An estimate was typed up for the recommended opener as well as cables and bottom fixtures because they weren’t rusting out on his door and they were fraying, once all worked was complete completed the door, head operated smoothly and efficiently without the potential of having a cable snap or break

Garage door spring replacement

Customer called us out because whenever she would push the button for her opener, she would hear the motor turn on, but the door was not moving. When I arrived on site, I was able to get into the garage. Inspected the issue at hand and concluded that it was a broken gear kit. Typed up options for the customer for open a replacement or gear kit replacement, the customer decided to go with the gear kit replacement Instead of the opener replacement, which was un advised. Once the gear kit was replaced, I was able to make necessary adjustments to

Customer called because his door wasn’t opening. I was able to confirm the issue was caused by a spring being broken. When I arrived on site, I didn’t do a full inspection, once I had the estimate typed up the customer did authorize the replacement. Once the garage door spring was replaced the garage had operated smoothly efficiently, and as it should.

Garage door spring replacement

Customer called for a crooked door, when I pulled in the driveway, I observed a crooked door, once I was able to do my inspection of all moving parts, I was able to find that the cable was broken. Typed up an estimate for the customer for a cable replacement, the cable did break because of rust.Customer authorized part replacement. Once the cables were replaced, the door ran smoothly and it ran level as it should.

Customer called us out because they were looking for a new door. Once I arrived on site, I was able to gather the necessary measurements so I could accurately get a new door that would fit for his application. I’m typed up an estimate for the customer emailed it over now awaiting a response.

Garage door spring replacement

Customer called and scheduled an appointment because her pull release cord for the garage door opener had caught on the roof rack. When I got on site, I did observe it was sitting a little low, I ended up shortening the cord to prevent it from catching on the roof rack again. Customer drove her vehicle in before I left to make sure it was high enough and her vehicle did clear. Customer was happy with the work performed.

Springs

Springs

Springs

Customer scheduled an appointment because her door was making excessive noise during operation. I was able to diagnose it as a dry door. The recommended action would be a garage door tuneup. Customer authorized getting a tuneup done. Once the tuneup was completed, the door had operated smoothly quietly and efficiently as it should.

Garage door repair

An appointment was set up with all American door because a single stall door was not opening. When I arrived on site, I was able to figure out the door did have a broken spring. There was slack in the cables. Recommendation and estimate was typed up for a spring replacement. Customer decided to move forward with it once the spring rolls replaced the door properly balanced, and ran flawlessly and operated with the opener as it should.

Garage door tuneup

Customer called for a repair versus replace. The spring was broken when I had arrived on site. I went over options for the customer. Did an inspection had an estimate typed up for part replacement versus a new door. Customer decided on moving forward with a new door, they did sell on site.

Customer scheduled an appointment because they had backed into the bottom section of the door. When I arrived on site, it was very clear that the section could not have a temporary repair done and needed to be replaced. I got all the necessary measurements and photos so a section replacement estimate could be sent over to the customer

Customer called because her door was not sealing up all the way and not sealing properly. When I arrived on site I was able to quickly diagnose that the PVC weatherstripping that mounts to the garage door. Opening was torn and recommended replacement. Customer authorize the trim replacement once all the work was completed. The door had sealed up properly and now the customer will not have a draft in the garage.