Rating
Reviews
Nate has been a part of our team since 2022. He is also a US Marine Veteran. If he is your onsite technician his drive to learn and grow each day will be evident in the service provided. His passions consist of hunting, fishing, and enjoying the outdoors with his wife.
Name: Nate Hunter
A service call was scheduled because the garage door was not opening and the homeowner had found a broken garage door spring. When I got on site, I confirm that one of the springs was broken. I did find other worn parts as well. Once the garage door springs, cable, bottom brackets, and the rollers were replaced. The door had operated flawless.
Service call got scheduled because the garage door was opening. I found a broken screen. I find worn down in bearing place once all the work was performed operated flawlessly.
Service call was scheduled because the opener was acting sporadic. During my diagnosis, I found a bad logic board recommended replacement of the opener due to its age. What’s the new garage door opener was installed the door operated flawlessly
All scheduled because he needed new weatherstripping on the outside. Once the weatherstripping was replaced, the door had sealed up properly.
Service call was scheduled because the opener rail had pulled off the header. All I had to do was straighten out the opener rail, replaced the arm and resecure the rail to the header and reset limits. Door ran flawlessly.
Service call was scheduled because the garage door was not opening. There were two broken springs. Further parts that were replaced where rollers, cables, bottom, brackets, and end bearing plates as well. Once all the work was performed, the garage door had operated flawlessly.
A service call was scheduled because the garage door was not opening after it had just closed down. Customer stated they heard a bang. When I got on site, I found a broken garage door spring, I also found rollers that were extremely wobbly and noisy and ready to fall apart. Once the springs and rollers were replaced, the door had operated flawlessly as if it were brand new.
A service call was scheduled because the door was sitting crooked. When I got on site, the door was completely out of the track. Due to the extensive damage a door replacement was required. All necessary measurements were taken in an estimate was sent over to the customer.
A service call was scheduled because the garage door was not opening, I had found a broken spring when I arrived on site. Once both Springs were replaced, the garage door had operated flawlessly.
Service call was scheduled because the garage door was not opening. Once I got on site I had found a broken garage door spring. Recommended both springs to be replaced. Once we grabbed door springs were replaced everything had operated flawlessly.
Service call was scheduled because the garage door was not opening. I found a broken garage door spring. Once both springs were replaced, the garage had operated policy.
Service call was scheduled because a door was not opening or closing. I got on site to inspection found cables rusting out bottom brackets rusting out and I also found that the GFCI outlet was tripped so I reset that completed the door work to prevent a crooked door. Door had operated flawlessly when completed.
The service call is scheduled because the garage door was not opening. I got on site and found a broken garage door spring. Once the springs cables and bottom racks are replaced the door and operated safely and problem free
A service call was scheduled because the door was having issues closing fully. When I got on site, I did find a door that was hit by a vehicle and the door did have extension damage. Service was not on the table because of the extensive damage a new door was recommended so an estimate was sent over.
Customer scheduled an on-site free estimate, all necessary measurements were taken of door, opening, door, size and tracking system. An estimate was sent over to the customer.
A service call was scheduled because the garage door was having issues closing. When I arrived on site, I found the door to be sitting crooked and during my inspection I found a rusted out cable as well as a rusted our bottom bracket, and I found rollers completely destroyed. Once both cables, 10 rollers, both bottom fixtures were replaced. The door had operated flawlessly.
Customer scheduled a service call because the garage door was not closing. They would have to push and hold the wall station down when I got on site. I did find a sensor that was misaligned but I also did find a broken garage door spring. Rollers were extremely old and worn down as well. Once springs and rollers were replaced in centuries were lined up the door had operated flowers.
A service call is scheduled because the door was having issues closing. When I got on site, I found a cable that had rusted out because the bottom bracket had rusted out, the rust had transferred over to the roller as well. Cables, rollers, and bottom brackets were replaced, once all parts were replaced the board operated flawlessly
A service call was scheduled because the garage door was having issues closing. When I got on site, the door was wide open and I was able to find a broken garage door spring, which would explain why the opener was not allowing the door to close. Once the springs were replaced, the garage door had operated flawlessly.
A service call was scheduled because the garage door opener had fallen from the ceiling. The reason why it had fallen from the ceiling was because there were opener issues of the door, trying to get forced through the concrete by the garage door opener. Recommended replacement and found cables and bottom, brackets rusted out. Once all parts and the opener were replaced, the garage door had operated flawlessly.
Customer scheduled a service call because the door was not opening. When arrived on site, I found a broken spring, which was causing the door not to open due to excessive weight. Once bolt springs were replaced, the door had operated flawlessly.
Customer scheduled a service because they were having issues with the door opening. When I arrived on site I had found the garage door sitting crooked because the cable had rusted out. Cables, rollers, and bottom brackets were replaced. I was able to save the vertical track. Once all parts were replaced, the door had operated flawlessly.
Garage door opener repair
Service call was scheduled because the door was having issues opening. When I got on site, I had observed a broken garage door spring. Which would explain why the garage door was not opening with the garage door opener. Once both springs were replaced, the door had operated flawlessly.
Service call is scheduled because the door was off track. One of the cables was not salvageable cables were replaced. Once the door was operational, I didn’t find it to be finding up pretty extensively so a tuna force performed as well. Once all work was completed. The door had a operated flawlessly and smooth.
